Recent Comments

Home  /  C Type Mechanical Power Press

C Type Mechanical Power Press

Steel Body Power Press Fixed & Inclinable.


The frame is of all steel construction, fabricated from steel plates with suitable cross ribbings. Presses upto 30 ton will be supplied with C.I. legs. Above 30 ton presses will be supplied with double C. Above 40 ton presses will come with steel legs. Proper alignment of the frame is ensured by machining of the cut steel plates before welding.


The clutch is of pin/rolling key type. The clutch is rigid and well supported. The clutch gives continuous stroke for mass production.

Crack Shaft

Crank Shaft is made of special alloy steel EN 8 machined to close accuracy and fitted in bronze bushes for perfect alignment.

Fly Wheel

Properly sized flywheel is made of high grade cast iron & is balanced for storing and releasing adequate energy for the pressing operations.


Gear are made of ( WCB 1030 ) material. Gear teeth are generated by Hobbing Machine.

this product was shared 0 times
  • Description
  • Reviews (0)
Table & Ram
Table and Ram are made of heavy duty graded cast iron FG 250 & seasoned. They are perfectly aligned to each other to obtain quality pressings.LubricationAn efficient shot lubrication system has been provided for lubricating the sliding surface and moving parts. The lubrication upto 50 ton is achieved through oil cup. Above 50 ton is achieved through Hand Pump.
Inclining Mechanism

Inclinable type presses are provided with inclining mechanism which can be easily set and locked in position. The press is so designed that even in maximum inclined position, it is stale under heavy pressing loads.



* All dimensions are in mm and weight in kg. Approximate only.* As continous improvements are contemplated for the product, the design and specications are not binding


There are no reviews yet.

Be the first to review “C Type Mechanical Power Press”

Your email address will not be published. Required fields are marked *