Recent Comments

Home  /  Under Crank Shearing Machine

Under Crank Shearing Machine

Steel Body Under Crank Shearing Machine
Frame
The Frame is fabricated from steel plates of is 226 Grade. The frame is designed to take heavy loads. The interlocked design put the direct support to frame. Thus frame is strain free and eliminates welds at load supports. Thus the Accuracy of The Machine is never disturbed.
Table
Steel fabricated, box type table is heavily ribbed for strength and is stress relieved its machined seat provides true and firm support to the bottom blade. It is adjustably for setting the blade clearance. The top surface of the table is provided with T slots for adjusting the front gurge.
Upper Beam
Upper beam is fabricated with thick M.S. Plate. It is Heavily ribbed from behind and is stress relived. The top blade is fitted at its accurately machined seat. Its sliding surface are machined and hand scrapped for smooth travel and sustained accurately.
Guide Ways
Accurately machined guide ways keep the beam in its bearing throughout the stroke. A taper wedge is provide to compensate for the wear and to facilitate quick setting of the blade clearance.

this product was shared 0 times
00
  • Description
  • Reviews (0)

Hold Down Device
The spring loaded mechanical hold down pads hold the sheet securely, to avoid slipping and bowing resulting in clean square cuts. Hold down units are provided with oversize pads to avoid impressions on sheet metal on request.
Drive, Clutch And Brake Drive
DRIVE : Motor, mounted on an adjustable platform, drives the large, cast iron fly wheel through v-belts. The power is Further transmitted to the fly wheel shaft through steel pinion and main gear box and than transmitted to main gear. Gun-Metal bushes are provided all the rotating parts .CLUTCH : Rollin key clutch is linked with the main gear and engages every time when the foot switch is pressed.BRAKE :Spring tensioned braked fitted at the end of the crank shift to damp inertia.
Front And Rear Gauges
FRON GAUGE : T-Slotted fron gauge fabricated from mild steel is detachable.REAR GAUGE : Rack and Pinion type rear gauge provides accuracy and is easily adjustable to parallel and taper strips efficiently.
Blade
Digvijay shears are provided with high quality single or segment HCHCR blade, with four edged.
Lubrication
All bearing parts and guide surfaces are lubricated through connected oil cups and operated lubrication pump.
Standard Equipments
Rear gauge, Side squaring and Front gauge, Foot pedal, Switch Motor pulley, Gear & Fly wheel guards and standard. Interaction manual, and Spanner.Standard Accessories
Electric Motor, Starter, V-belts, Manual Lubrication pump, Front gauge, Rare gauge with Scale and Stroke counter, Electric and lubricating pipe Fittings and waiting.
Power Supply
400/440 Volts, 3 Phase, 50 Cycles.
Note:-
Electric items & blades are not under warranty.Machines will be supplied without electricals & V-belts.

Model Cutting

Capacity
In M.S. (L x T)

Front
Gauge
Rear
Gauge
Table
(H x w )
Blade
( L x W x T )
Stroke
Per Minute
Hold Down
To

Knife Edge

Machine
( L x W x H )
Main Motor
HP / KW
Approx.
Weight Kgs.
JUS – 1 610 x 1.5 450 450 800 x 305 635x63x14 60 5 1170x915x1150 1/0.75 450
JUS – 2 914 x 1.5 450 450 800 x 305 940x63x14 60 7 1470x915x1150 1.5/1.2 580
JUS – 3 1270 x 1.5 450 450 800 x 305 1295x63x14 60 9 1900x1100x1220 2/1.5 700
JUS – 4 1525 x 1.5 450 450 800 x 305 1550x63x14 60 11 2200x1100x1220 2/1.5 850
JUS – 5 2030 x 1.5 450 450 800 x 315 2032x63x14 60 13 2700x1200x1220 3/2.2 1100
JUS – 6 2540 x 1.5 450 450 800 x 315 2540x63x14 60 15 3200x1200x1220 3/2.2 1400
JUS – 7 610 x 2 600 600 800 x 355 635x63x14 60 5 1470x965x1120 2/1.5 650
JUS – 8 914 x 2 600 600 800 x 355 940x63x14 60 7 1778x965x1220 2/1.5 900
JUS – 9 1270 x 2 600 600 800 x 355 1295x63x14 60 7 2200x1950x1400 3/2.2 1290
JUS – 10 1525 x 2 600 600 800 x 355 1550x63x14 60 9 2450x1950x1400 3/2.2 1600
JUS – 11 2030 x 2 600 600 800 x 400 2032x63x14 60 11 2950x1950x1400 5/3.7 2500
JUS – 12 2540 x 2 600 600 800 x 400 2540x63x14 60 13 3450x1950x1400 5/3.7 3000
JUS – 13 610 x 4 600 600 825 x 355 635x75x18 60 5 1470x965x1220 3/2.2 1000
JUS – 14 914 x4 600 600 825 x 355 940x75x18 60 7 1778x965x1220 3/2.2 1250
JUS – 15 1270 x 4 600 600 825 x 400 1295x75x18 50 7 2290x2000x1525 5/3.7 2100
JUS – 16 1525 x 4 600 600 825 x 400 1550x75x18 50 9 2540x2000x1525 5/3.7 2600
JUS – 17 2030 x 4 600 750 825 x 450 2032x75x18 50 11 3050x2000x1525 7.5/5.6 3200
JUS – 18 2540 x 4 600 750 825 x 450 2540x75x18 50 13 3550x2000x1525 7.5/5.6 3800

Reviews

There are no reviews yet.

Be the first to review “Under Crank Shearing Machine”

Your email address will not be published. Required fields are marked *